Fiat Panda servostyring problemer ✓  2 Years Warranty ✓ in stock  ✓ incl. installation manual (without you are not allowed to replace it. | Call us now !  

Fiat Panda servostyring problemer C1002 styringsvinkel sensor

The steering angle sensor is in 99.99% the cause of malfunction of  the electric power steering. 

Do you have the below symptoms: 

✓ 1. Heavy steering (can be in one direction but will mostly be in both directions)

✓ 2. Intermittent loss of steering.

✓ 3. Total loss of power steering.

✓ 4. Steering starts to pull to one side (Self steer).

✓ 5. Steering vibrates when turning.

✓ 6. Power steering light illuminated on the dash 

Important: Fiat Panda servostyring problemer ?

Only if you have loss of power steering and also have error code

C1002, C5002, C1006, C5006,  C1001 and also vibrations you can repair the Powersteering

Column by replacing the sensor !

Common Error Codes in the Powersteering ECU  

C1002, C5002, C1006, C1001 & C1002, 

If you have other error codes like only C1001 without vibrations you need to replace the ECU !

Repair Package Includes:

✓ 1 x Steering / Torque / Position angle Sensor

✓ 1 x Steering / Torque angle Sensor installation instructions.

✓ 1 x On Request Torque sensor calibration OBD device (on loan basis)

✓ 1 X On Request Torque sensor calibration software & manual.
           (Win XP / 7 / 8 / 10)

Shipment per DHL. Delivery 1-2 days after receipt of order!

Step by step Sensor installation manual is included.  
 

It will take max 1.0 hour to replace the Power steering torque / angle / position sensor ! 

You do not need to remove the steering column and the steering wheel and airbag etc!

Important :

Please mention Car details : VIN, Year, model with or without ASR - ESP !!!!

Please check the Error Codes before ordering ! Only with C1002, C5002 , C1006 ! 

There is no need to change the steering column.

Leave the column in the car and Repair your column in 1-1.5 hour maximum!

There are many Advantages of repairing the Powersteering by replacing the steering angle sensor: 

✓ 2 year warranty. 

✓ Save time. You can start the repair of the powersteering column immediately so no delay. 

✓ No waiting time on your Steering column 3 to 5 days. 

✓ You keep your good working motor and Module! 

✓ Save money by changing the sensor in stead of the column. Replace it in 1.0 hour.

✓ A step by step sensor installation manual is included. 

✓ 6 days a week phone support 8:00- 17:00

Important: 

A very detailed Sensor installation manual is included. 

Please do not install the sensor without the installation manual !

If you do not follow our instructions it is possible that the steeringwheel will turn by itself and that torquesensor calibration is not possible !

Important:

After Sensor replacement you always need to perform Torque sensor calibration.

Torque Sensor Calibration is possible with

Snap-on, Fiat ex, WOW, Autel, Bosch KTS ,Gutmann, Delphi, Autocom, AVL , Texa, Brainbee, MES etc.

With our OBD device  you can calibrate  the Torque sensor

You need to order the calibration device seperate ( Loan fee) and need to return it afterwards!  

We  are 100% confident you prefer to repair the Power Steering Column by 

changing the sensor in 1 hour only.

Special Tool needed : Very big circlip pliers :  You can Buy it in our Shop as well !

We will be happy to assist you by phone if you need assistance.

Please contact us now!

Customer Phone Support line :   +31243785906 

Email: Info@steeringanglesensor.com